Woodburn Dragstrip
7730 Hwy. 219
Woodburn, Oregon
503-982-4461

New Jr Dragster Body Requirements

Beginning January 1, 2014, Jr Dragster bodies must conform to the following rule:

Body and cowl must be constructed of aluminum, fiberglass, or carbon fiber and extend forward to foot-box bulkhead. Driver compartment, frame structure, roll cage, and body must be designed to prevent driver’s body or limbs from making contact with wheels, tires, exhaust system, or track surface. Any portion of the body side panels that extend upward into the driver’s line of sight must be clear and permit an unobstructed horizontal view for a minimum of 180 degrees. Body may not cover top of engine, wheels, or tires. Front overhang not to exceed 15 inches, measured from centerline of front spindle to forwardmost point of car.

FULL INFORMATION LISTED IN THIS PDF. THIS RULE WILL BE ENFORCED AT WOODBURN DRAGSTRIP IN 2014

Comments are closed.